A Simple Plan!

At least you only have 20 weedy motors layin around! :blush:

Sometimes that NOT a good thing...when you're limited on space!!

Aww!
Whats a bit of OCD between mates! :blush:

Well I got a little bit more done!
At least its starting to resemble a boat anyway! :laugh:
Bottom is glued and just got the sides on, still need to trim and sand before a coat of resin inside!
As you can see there is plenty of room for a 30cc homelite without trimming any casing, I cut the centre bulhead out aswell to allow more room to get the balance right!
I also sloped the rear down to the transom to get rid of the boxy rear!

Hi Oz.

Looks good! Remember to remove resedues of glue. Should save a few grams of weight on the boat. I do that myself...

BTW: Watch out for that green animal under the bed! Don't trust it too much. I would'nt do that myself...

Cheers!

Woodie.

Will do Woodie!
Once I clean the glue up etc. I will be using some fibreglass cloth tape to reinforce
all the inner seams.
Dont want it to start coming apart the first time it takes a tumble! :blink:
Will also get the top sheet printed out and cut today!

Hi Oz,
Coming along nicely.
Moofy

Looking good Bud!!!! Keep it coming!!!

Test fitting the top sheet before I finish sanding the frames etc.

Hi Oz,
LOOOKIN' GOOOOOD. (Are we there yet?) :woohoo: :woohoo:
Moofy