Here are some pics of my Stryker Y6 Mono build, Running all Ron Buck Hardware Mod 260 Zenoah CC Racing 1" 105 degree Tuned pipe IV Bag & Octura X 472/2 prop Looking fwd to my first run. Just need to do radio box to finish

Tony http://www.modelgasboats.com/media/kunena/attachments/legacy/images/2395_My_Boats_013_jpg032e3ec4edf78f405f23b4aa72d42548
http://www.modelgasboats.com/media/kunena/attachments/legacy/images/2397_My_Boats_015_jpg1f310a342426294b7ce1d303282432fb
http://www.modelgasboats.com/media/kunena/attachments/legacy/images/2399_My_Boats_010_jpg6c112503be51c9547025194af11fddf7
http://www.modelgasboats.com/media/kunena/attachments/legacy/images/2403_My_Boats_014_jpg60b1ea870945684235df59521233168b

Nice build! Let us know how she runs! I love mine! Racing at the Northern Nats in London next week.

Yea ok Will do mark, Have you put carlos 1" header pipe on the y6 yet ??? Let me know what you think ??? Compared to say the hanson pipe you had on it, have run one on my Hydro and its all good.

Cheers Tony

Actually I am at our cottage right now and will be testing the 1" pipe on the Seaducer Hydro. The pipe I have currently is the ACE pipe, not CC Racing. I will try to get a CC Racing pipe to test soon also.

Hi Mark,
Run the Stryker Y6 for the first time on the weekend, tracks straight and turns are a breeze, running an octura x472 going to play around with a few diffrent props and also the stinger drive, Were are you running your stinger ???

Tony

I have found that a Austin X472 is best for heat racing. The Voodoo Tater is a little bit faster but not as good in heat racing rough water. I have the drive setup like on my Insane. I think it is about 1/2" up from keel (on drive centerline at transom) and has a lot of negative to keep nose of boat down. I use the tabs only slightly to stop chine walk.

This outdrive was made by me. The drives from Ron Buck don't have slotted mounting holes.

Steve

A little slow updating here, but my Y6 actually got me a first place in Mono at the Northern Nats in London ON. Boat runs good. Gonna be running it in Orlando at the Winternats this week.. hopefully it's good to me again! I have since added 2 more trim tabs...will see what that does.

Hi Steve,
Was ron getting them off you ??? Are you still making them as i am after some.

Regards Tony

Mark, whats the idea of the extra two trim tabs on the Y6 ???

This boat is quite similar to the Insane mono....I see many guys now running the 4 tabs on them...seems to reduce the typical chine walk....will let you know how it turns out...the chine walk has never really been a problem for me though....