I am going to buy a set as that of the photo but not I that measured must have am of the Argentine one where I can buy it?

I am in the process of setting up a machine shop to manufacture hardware for model boats. I am going to start with Gas boats, then move on to electric and nitro, then in to gas cars.

I bought a CNC milling machine big enough to start making the hardware I made a few years ago, before I got in to the more lucrative business of making things that kill people. I retired from that 3 1/2 years ago, now I work from home and the neighbors will just have to accept my hobby. They all know what I do, and none of them seem to have a problem with it.

Hi Steve.

What you did some years ago is not acceptable for me.
But that was then, and I will only relate to what you do now.
Almost everybody have some skeletons in the closets, me too.
So let us lock the closets and burn them. It's never too late to do better as you are doing now.
For that reason I gave you a plus in karma, and I hope others will do so too.
I wish you good luck with your new business. If you specialize in cumstomized hardware as you do with my engine rails, you'll be fine.

Cheers!
Woodie.