- Posts: 2491
- Thank you received: 55
Antron Brown's Twin Inline Warpath Rigger in the building...
- marc
-
Topic Author
- Offline
14 years 8 months ago - 14 years 8 months ago #18496
by marc
"
Antron Brown's Twin Inline Warpath Rigger in the building... was created by marc
This one is being built for Antron Brown... its is a Warpath on steroids! 
It will be powered by a CC modified twin inline Zenoah with billet bottom end and some goodies!
The tub is longer and slightly wider than the single version and reinforced with unidirectional carbon fiber cloth. The engine bay has added 1/8" doublers, making the sides 3/8" thick with the carbon going up the sides sandwiched between the plywoods. Inner width in the engine bay is 5". The bottom sheeting is 1/8" instead of 1/16". The bulkheads and top sheeting are all dowel pinned as is the oak support block for the rear boom tube. The tub is VERY stiff and true.
The sponsons are solid balsa core with new mods done to the turn fin sponson. The threaded inserts for the turn fin now go inside large hardwood dowels that span the two 1/4" sponson formers making them very strong. This mod will be done to future Warpath kits also. The build is nearing completion...I will post more pics as I progress.
It will be powered by a CC modified twin inline Zenoah with billet bottom end and some goodies!The tub is longer and slightly wider than the single version and reinforced with unidirectional carbon fiber cloth. The engine bay has added 1/8" doublers, making the sides 3/8" thick with the carbon going up the sides sandwiched between the plywoods. Inner width in the engine bay is 5". The bottom sheeting is 1/8" instead of 1/16". The bulkheads and top sheeting are all dowel pinned as is the oak support block for the rear boom tube. The tub is VERY stiff and true.
The sponsons are solid balsa core with new mods done to the turn fin sponson. The threaded inserts for the turn fin now go inside large hardwood dowels that span the two 1/4" sponson formers making them very strong. This mod will be done to future Warpath kits also. The build is nearing completion...I will post more pics as I progress.
"
Attachments:
Last edit: 14 years 8 months ago by marc.
Please Log in or Create an account to join the conversation.
- Canadian Hot Rod RC Boats
-
- Offline
- marc
-
Topic Author
- Offline
14 years 8 months ago - 14 years 8 months ago #18502
by marc
Yes I will have these available as kits as soon as they have been properly tested. I could kit them already but they have never been run so it would be at one's own risk.
www.modelgasboats.com
Sent from my iPhone using Tapatalk.
"
Replied by marc on topic Antron Brown's Twin Inline Warpath Rigger in the building...
Canadian Hot Rod RC Boats wrote: Very Nice - when will kits be available ???
Randy
Think I found new project ............... eh :ohmy:
Yes I will have these available as kits as soon as they have been properly tested. I could kit them already but they have never been run so it would be at one's own risk.
www.modelgasboats.com
Sent from my iPhone using Tapatalk.
"
Last edit: 14 years 8 months ago by marc.
Please Log in or Create an account to join the conversation.
- Canadian Hot Rod RC Boats
-
- Offline
- marc
-
Topic Author
- Offline
- Canadian Hot Rod RC Boats
-
- Offline
- Canadian Hot Rod RC Boats
-
- Offline
- Butch
-
- Offline
- dwr9
-
- Offline
- david36pt
-
- Offline
Time to create page: 0.177 seconds